Creative Labs Sound Blaster Audigy 2ZS User Manual.Installing software, Useful information. Preparing Your Computer. Remove metal brackets. SOUND BLASTER AUDIGY 2 ZS and AUDIGY 2 ZS PLATINUM SETUP. SOUND BLASTER AUDIGY 2 ZS and AUDIGY 2 ZS PLATINUM SETUP. Remove 5?" drive bay front panel. Power splitter cable. Screws for Platinum Drive. Internal FireWire® (IEEE® 1394) cable. Remove any audio card in your computer and uninstall its software. Disable any on-board audio device in your computer. Turn off your computer and all peripheral devices before removing the computer cover. Connect to system power unit. For Audigy 2 ZS Platinum only. For Audigy 2 ZS Platinum only. For Audigy 2 ZS Platinum only. With Compact Disc Digital Audio (CDDA) extraction enabled on your computer's operating system, you do not have to use an audio cable to connect your drive to your audio card. For more information, refer to the User's Guide (on CD). Go to d:\manual\ \manual.chm (replace d :\ with your CD-ROM drive letter and with the language that the document is in). Installing Sound Blaster Audigy 2 ZS drivers and applications. 1. After you have installed your hardware, turn on your computer. Windows automatically detects the audio card. 2. When prompted for the audio drivers, click the Cancel button. 3. Insert the Sound Blaster Audigy 2 ZS Installation and Applications CD into your. CD-ROM drive. Your CD should start automatically. If it does not, follow the steps below: My Computer icon. ii. Right-click the CD-ROM/DVD-ROM drive icon, and then click AutoPlay . 4. Follow the instructions on the screen to complete the installation. 5. When prompted, restart your system. Uninstalling drivers and applications. Refer to the Installing Software chapter in the User's Guide (on CD). These instructions are applicable to all Windows operating systems. PN 03SB000000030 Rev.A. Up to two drives can be connected simultaneously to the Audigy 2 ZS, using both the AUX_IN (analog) and CD_SPDIF (digital) connectors. Analog CD audio cable (available separately) for analog CD audio output. Digital CD audio cable for digital CD audio output. Connect Joystick/ MIDI bracket ribbon cable (optional) Attach Joystick/ MIDI bracket. Insert Sound Blaster Audigy 2 ZS audio card. To prevent permanent damage, use only: - the AD_EXT cable with the AD_EXT connector - the Audigy 2 ZS audio card with the Platinum Drive. Do not force any cable into a connector. This can cause permanent damage to your hardware. Your Platinum Drive is capable of supporting both dynamic and condenser microphones. By default, your Platinum Drive is set for use with a condenser microphone. To use a dynamic microphone, fit the provided shunt onto Jumper JP1 of your Platinum Drive. Connect Internal FireWire (IEEE1394) cable. Connect power splitter cable. Insert Platinum Drive into drive bay. Secure Platinum Drive with screws provided. User's Guide (on CD) For more information, refer to the User's Guide (on CD). > Programs > Creative > Sound Blaster Audigy 2 ZS > Documentation > Digital output sampling rate. Make sure you select the sampling rate of the PCM SPDIF output of your Digital Out connector to match the requirements of your receiving device. The choices available are 48 kHz or 96 kHz. If you do not hear any sound from your digital speakers or experience intermittent hissing, you may need to select a lower digital output sampling rate. To select the digital output sampling rate: 1. In. Windows Control Panel , double-click the AudioHQ icon. AudioHQ window, double-click the Device Controls icon. Sampling Rate tab. Digital Output Sampling Rate list, click the required sampling rate. For more technical updates, go to http://www.soundblaster.com. You can use Creative Diagnostics to test the software and hardware installation. Go to Start. > Programs > Creative > Sound Blaster Audigy 2 ZS > Creative Diagnostics . Joystick/MIDI bracket (with ribbon cable) Phillips-head screwdriver (not included) Digital CD audio cable. Sound Blaster Audigy 2 ZS audio card. Sound Blaster Audigy 2 ZS Platinum Drive. Connect AD_EXT cable. Connect Internal FireWire (IEEE 1394) cable. Скачать с файлообменника:
 |
Новинки: